Z
© 2014 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
®
Y
,
Z
, Mirra 2 are among the registered trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
82
Part no. 1BBT3C rev D.
3. Place the nylon cap over
the bottom of the cylinder.
Strike the cap using a 2lb
hammer to dislodge the
base from the cylinder.
4. Remove the base from
the cylinder.
5. To reinstall the casters,
place the thumb at the bottom
of the caster and wiggle in
until a audible click sound is
heard.
Re-Assembly Steps:
6. Place the cylinder and
seat assembly into the base.
