manualshive.com logo in svg

HermanMiller Locale L-Desk, Installation And Operating Instructions Manual

Share
Download
HermanMiller Locale L-Desk Installation And Operating Instructions Manual Download Page 5

Z

© 2017 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.

TM

 Sense, Setu, Tu, Traverse and Locale are among the trademarks of Herman Miller, Inc. 

Illustrations and specifications are based on the latest product information available at the time of publication. 
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products. 

Part no. 1bch5g rev D.

5

1.  Place Base at desired location.

2.  Open or remove Doors.

3.  Remove Access Panels by pulling out at top of panel, then lifting up and out.

Access Panel

Access Panel

Door

Door

A

Tools Needed:

Power Driver #2 Phillips Bit

Level

Dowel Pin

Column Leg

Leg Glide

AH

AL

AM

AN

M5 x 10 Flange Head 

Screw(3)

AK

3mm Metric 

Hex Bit

4mm Metric 

Hex Bit

5mm Metric 

Hex Bit

6mm Metric 

Hex Bit

M8 x 25 Hex Socket 

Head Machine 

Screw (4)

Summary of Contents for Locale L-Desk
































Reviews:

No comments

Brands by name

Popular brands

Load more brands