Z
© 2013 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
®
Y
,
Z
and Intent are among the registered trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Part no. 1b4z6d rev C.
2
Screen:
5.62
Edge
Step
Drill Holes
(Both Sides)
1. Determine where Screen is to be installed onto work surface. Note: Center of
Bracket is 5 5/8” from edge of screen.
2. Position one Screen Bracket (B) onto Work Surface.
3. Using Screen Bracket as template, drill four 1/8” pilot holes 1/2” deep.
4. Remove Bracket and install onto Screen (A) using 2 Thread Cutting Screws (C).
Repeat for remaining Screen Bracket (B). See Bracket locations above.
B
B
C
C
A
11.74
FT694._24A
FT694._18A
FT694._18B
11.74
5.74
