201
8
Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A.
, Abak, Action Office, Avive, Co/Struc, Ethospace, Intersect, Meridian, Passage, Prospects, Quadrant, Resolve, Scooter, Vivo interiors, Lifework, Teneo,
and V-Wall are among the registered trademarks of Herman Miller Inc.
Burdick Group, CLT, Flex-Edge, My Studio Environments, and Q system, are among the trademarks of Herman Miller Inc.
Illustrations and specifications are based on the latest product information available at the time of publication. The right is reserved to make changes in design and specifications
at any time, without notice, and also to discontinue products.
©
®
™
5
1B4B13 REV E
5.
Slide Spine Shaft through the head of the Spine and into the Antler tail. The
Shaft should stick out evenly on both ends
6
.
Set the Left and Right Hand
End Caps on their correspond-
ing ends of the Spine Shaft.
7.
While holding the End Caps in Place, rotate
the Antler and Spine down until the Caps are
firmly in place in the Chair Back.
Inside View of
Right-Hand Cap
Inside View of
Left-Hand Cap
