HermanMiller Eames Assembly Instructions Download Page 2

Page: 2 / 3

HermanMiller

Eames

Table

Assembly Instructions

3.1

Thread jam nut on one end of threaded rod until jam nut stops.

Step 3

3.2

Threaded rod end with jam nut all the way into the top casting. Tighten jam nut against top
casting.

4.1

Place tube over rod onto top casting.

Step 4

5.1

Place spreader assembly into slot in tubes, when applicable.

6.1

Insert legs into slots in the tubes.

Step 5

Step 6

Summary of Contents for Eames

Page 2: ... until jam nut stops Step 3 3 2 Threaded rod end with jam nut all the way into the top casting Tighten jam nut against top casting 4 1 Place tube over rod onto top casting Step 4 5 1 Place spreader assembly into slot in tubes when applicable 6 1 Insert legs into slots in the tubes Step 5 Step 6 ...

Page 3: ...nd spreader assembly Note Retainer ring fits inside of tube Step 7 7 2 Place locating washer over legs and spreader assembly 7 3 Insert cap screw and tighten 8 1 Place lock washer and threaded nut on threaded rod and tighten the nut to 45 ft lbs Step 8 9 1 Place table in upright position Step 9 ...