Z
© 2013 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
®
Y
,
Z
and Canvas Office Landscape are among the registered trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Part no. 1b2lw1 rev E.
4
3. Flipper Door Unit Installation
1. With Door/Cover Assembly in open position,
place rear slots in door guides over rear mounting
screws.
2. Slide Door/Cover Assembly back until front slots
in Door Glides drop over front mounting screws.
3. Make sure Door/Cover Assembly is fully seated
onto mounting screws. Tighten all screws.
If this product is reconfigured or moved, the above steps should be
reversed. A fully assembled flipper unit should never be removed from
the frame or damage to the gear rod assembly will occur.
NOTICE
G
G
