GB
- 15 -
Fitting the pleated
fi
lter (Fig. 8/24)
For dry-vacuuming, slip the pleated
fi
lter (Fig.
3/24) over the
fi
lter basket (Fig. 2/20). The pleated
fi
lter (Fig. 3/24) is suitable for dry-vacuuming only.
5.3 Fitting the tank bag (Fig. 9)
Fit the dirt bag (Fig. 3/4) as shown in Figure 9.
5.4 Fitting the suction hose (Fig. 1-3/9)
Connect the suction hose (9) to the correspon-
ding connector on the wet and dry vacuum clea-
ner, depending on the application required.
Vacuuming
Connect the suction hose (9) to the suction hose
connector (8).
Blowing
Connect the suction hose (9) to the blow connec-
tor (19).
Air regulator (Fig. 3/15)
The air regulator (15) can be
fi
tted between the
suction hose (9) and the suction tube (17). The
suction power of the nozzle can be in
fi
nitely ad-
justed using the air regulator (15).
When wet vacuuming, make selective use of the
air regulator to suck in air as well as liquids. This
will help to take some strain o
ff
the equipment
when vacuuming liquids.
5.5 Suction nozzles
Dual-purpose nozzle (Fig. 3)
The dual-purpose nozzle (14) is for vacuuming
solids and liquids over medium to large areas.
Various attachments can be
fi
tted to the combi-
nation nozzle depending on what you sort of work
you wish to carry out:
Crevice nozzle (Fig. 3)
The crevice nozzle (23) is designed for vacu-
uming solids and liquids in corners, edges and
other areas that are di
ffi
cult to access.
Upholstery nozzle (Fig. 3)
The upholstery nozzle (11) is specially designed
for vacuuming solids on upholstery and carpets.
6. Operation
6.1 ON/OFF switch (Fig. 1/7)
Switch position 0: O
ff
Switch position I: On
6.2 Dry vacuuming
Use the pleated
fi
lter (24) for dry vacuuming (see
point 5.2). The dirt bag (4) can be
fi
tted in addition
when removing particularly stubborn dirt (see
point 5.3).
Always ensure that the
fi
lters are perfectly secure.
6.3 Wet vacuuming
For wet-vacuuming, use the foam
fi
lter (25) (see
point 5.2).
Check that the
fi
lter is securely
fi
tted at all times.
When wet vacuuming, the
fl
oating safety switch
(Fig. 2/21) closes when the maximum tank level
is reached. In doing so, the suction noise of the
equipment will change and become louder.
You must then switch o
ff
the equipment and em-
pty the tank.
Danger!
The wet and dry vacuum cleaner is not suitable
for the vacuuming of combustible liquids.
For wet vacuuming, use only the supplied foam
fi
lter.
6.4 Blowing
Connect the suction hose (Fig. 1/9) to the blow
connector (Fig. 2/19) on the wet and dry vacuum
cleaner.
7. Replacing the power cable
Danger!
If the power cable for this equipment is damaged,
it must be replaced by the manufacturer or its
after-sales service or similarly trained personnel
to avoid danger.
Anl_H_NT_20_SPK7.indb 15
Anl_H_NT_20_SPK7.indb 15
19.02.2018 15:30:19
19.02.2018 15:30:19
