4. Technical data
Mains voltage:
230 V ~ 50 Hz
Power input:
1,100 watts
Container volume:
15 l
Weight: 3.8
kg
5. Before starting
Important!
Before you connect the appliance to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
The appliance may only be connected to a shock-
proof socket.
5.1 Assembling the appliance
Fitting the appliance head (Fig. 5)
The appliance head (3) is fastened to the container
(7) by the locking hook (6). To remove the appliance
head (3), open the locking hook (6) and remove the
appliance head (3). When fitting the appliance head
(3), make sure that the locking hook (6) locks into
place correctly.
Fitting the wheels (13)
Fit the wheels in accordance with Fig. 4.
Fitting the handle
Carry out the assembly as shown in Figure 7.
5.2 Fitting the filter
Important!
Never use the wet and dry vacuum cleaner without a
filter.
Check that the filter is securely fitted at all times.
Fitting the foam filter (Fig. 6/15)
For wet-vacuuming, slip the supplied foamed plastic
filter (15) over the filter basket (Figs. 2/4).
Fitting the fabric filter
The fabric filter (14) is designed for vacuuming fine,
dry dirt and is already fitted in the filter cage when
the equipment is supplied. To fit the fabric filter (14),
slip it over the filter cage (4) using the same
procedure as with the foam filter (15). The fabric filter
(14) is suitable for dry-vacuuming only.
5.3 Fitting the suction hose (10)
Connect the suction hose (10) to the corresponding
connector on the wet and dry vacuum cleaner,
depending on the application required.
Vacuuming
Connect the suction hose (10) to the suction hose
connector (8).
Blowing
Connect the suction hose (10) to the blow connector
(9).
To extend the suction hose (10) you can attach one
or more of the elements which make up the 3-part
suction tube (11) to the suction hose (10).
5.4 Suction nozzles
Dual-purpose nozzle (12)
The dual-purpose nozzle (12) is for vacuuming solids
and liquids over medium to large areas.
6. Operation
6.1 ON/OFF switch (Fig. 1/2)
Press the ON/OFF switch (2) to switch the
equipment ON and OFF.
6.2 Dry vacuuming
Use the fabric filter (14) for dry vacuuming (see point
5.2).
Always ensure that the filters are perfectly secure.
6.3 Wet vacuuming
For wet-vacuuming, use the foam filter (15) (see point
5.2).
Check that the filter is securely fitted at all times.
Important!
When wet vacuuming, the floating safety switch (5)
turns off the wet and dry vacuum cleaner
automatically when the maximum level is reached.
Important!
The wet and dry vacuum cleaner is not suitable for
the vacuuming of combustible liquids.
For wet vacuuming, use only the supplied foam filter.
6.4 Blowing
Connect the suction hose (10) to the blow connector
(9) on the wet and dry vacuum cleaner.
8
GB
Anleitung_H_VC_1100_SPK7:_ 02.11.2009 16:24 Uhr Seite 8
