Safety Note
All products manufactured and supplied by Heritage Bathrooms are safe to use provided that they are
installed, operated and receive regular maintenance in accordance with these instructions. This product
needs to be installed in accordance with, and meet the requirements of the Water Supply (Water Fittings)
Regulations 1999 and current by-laws. For full Installation Requirements & Notes (IRN) please visit
wras.co.uk/directory
.
Isolation valves must be fitted to the inlet water supplies to ensure ease of future maintenance.
Before installing this product the water supply must be thoroughly flushed in order to remove any swarf,
solder etc. Full access must be made available for future maintenance/servicing purposes.
Before starting any installation project please consider the following:
•
Prior to drilling into walls, check there are no hidden electrical wires or cables
or water supply pipes with the aid of an electrical detector.
•
If you use power tools do not forget:
- Wear eye protection.
- Unplug equipment after use.
This product must not be modified in any way as this will invalidate the guarantee.
If you are in any doubt about your ability to install this product safely you must employ
the services of an experienced, qualified plumber.
If in doubt, contact a registered plumber or
your Local Water Authority or the Secretary of the Institute of Plumbing, address as follows:-
The Institute of Plumbing,
64 Station Lane,
Hornchurch,
Essex,
RM12 6NB,
Tel: 01708 472791
3
General Specifications
Operating pressure range (bar)
Min
Max
1 Hole Basin Mixer
0.4
5.0
1 Hole Bidet Mixer
0.4
5.0
3 Hole Basin Mixer
0.3
5.0
3 Hole Basin Mixer Swivel Spout 0.4
5.0
Maximum static pressure – 10.0 bar
NOTE:-
Nominally equal (balanced) inlet supply pressures are recommended for optimum
Performance of mixer taps.
