background image

3

Safety Note

Please read these instructions and retain for future use. 
All products manufactured and supplied by Heritage are safe, provided they are installed correctly, used 
correctly, and receive regular maintenance in  accordance with these instructions.

If you are in any doubt about your ability to install this product safely you must employ the services of an 
competent person who has experience of fitting products of this nature.

Installer Guidelines

The furniture in this booklet comes mostly assembled. Shelves will need to be installed once furniture is in 
position and fixed. 

Wall Cabinets will need to be fitted on solid walls capable of some load bearing. 

The installation of these products greatly depends on the floor and wall being level. If this is not the case, it 
must be corrected before installation.

 Before starting any installation project please consider the following:

•  Prior to drilling into walls, check there are no hidden electrical wires or cables or water supply pipes 

with the aid of an electrical detector.

•  If you use power tools do not forget:
 

- Wear eye protection.

 

- Unplug equipment after use.

•  This product must not be modified in any way as this will invalidate the guarantee.

Tools Required

Summary of Contents for Freestanding Furniture & Wall Hung Cabinet













Reviews: