The In-Wall Amplifier has built-in Bluetooth receiver ability
allowing you to wirelessly stream audio to your connected
speaker system.Follow these steps to get connected:
Make sure the unit is properly connected to external speakers.
Make sure the unit is properly connected to a power source.
1. Before attempt ing to pair / connect, ensure the unit is
in 'Bluetooth Mode'. Enter 'Bluetooth Mode' by selectng
'BT'on the unit's front panel Input Selector.
2. Press and Hold the Volume Knob for more than 3 Seconds
to POWER the Unit ON/OFF.
3. Then, go to your Smart device's Bluetooth Network
Settings and connect to the Wall Plate. The Network
Name will appear as 'Herdio' on your device list. No
password is required to connect but if you are
prompted enter '0000' (4 zeroes).
4. Upon pairing, the Bluetooth LED indicator light will
blink progressively quicker untl the unit successfully
pairs with a compatible Bluetooth device.
5. When a successful Bluetooth connecton is established
the Bluetooth L ED indicator light will shine solid and
indicatng that the unit is ready to transmit audio.
4
:
Summary of Contents for HWA16BT
Page 1: ......
