Maintenance
034-11401_1.0_24.08.2017
98
8.5.5.1
First aid
If a fault message is displayed, run through the
following actions:
Make a note of the system message.
Shut off and re-start the drive system.
If the system message is still displayed, remove
and then re-insert the battery.
Re-start the drive system.
If the system message is still displayed, contact the
HERCULES specialist dealer.
8.5.5.2
Specific fault eradication
Make a note of the system message.
If the system message is still displayed, contact the
HERCULES specialist dealer
Fault
Remedy
540,
604,
605
The bicycle is outside the permitted temperature
range.
Switch off the bicycle.
Allow the system components to cool down or warm
up.
Re-start the drive system.
430
Charge the internal display battery.
410,
418
Check whether the keys are jammed, e.g. because
dirt has got into them.
Clean the keys as necessary.
460,
550
Disconnect the consumer from the USB port.
Re-start the drive system.
592
Insert a compatible display.
Re-start the drive system.
606
Check the cabling.
Re-start the drive system.
Table 29: Fault eradication using the code
