manualshive.com logo in svg

Hercules Robert/a F7 Series, Operating Instructions Manual, Page: 73 / 108

Share
Download
Hercules Robert/a F7 Series Operating Instructions Manual Download Page 73

034-11401_1.0_21.08.2017

71

Operation

7.5

Electric drive system

7.5.1

Switching on the drive system

There are two options for switching on the drive 
system.

A sufficiently charged battery has been inserted on the 
bicycle.

The 

display

 has been inserted correctly into the 

mount.

The battery is firmly in place. The key has been 
removed.

1 Battery On-Off button

Press the 

battery On-Off button

 once.

2 Display On-Off button

Press the 

display On-Off button

 once on the inserted 

display

.

As soon as the system has been activated, 
ACTIVE LINE/PERFORMANCE LINE appears 
briefly on the 

display

.

After switching on, a speed of 0  KM/H is displayed 
on the 

display

. If this is not the case, you must 

check whether the 

display

 has been engaged 

properly in place.

Crash caused by lack of readiness for braking

A drive system which has been switched on can be 
activated by the application of force on the pedals. 
There is a risk of a crash if the drive is activated 
unintentionally, and the brake is not reached.

Never start the electric drive system, or switch it off 
immediately, if the brake cannot be reached safely 
and reliably.

CAUTION

!

Summary of Contents for Robert/a F7 Series













































































































Reviews:

No comments