Page 8
For technical questions, please call 1-888-866-5797.
Item 57275
Troubleshooting
Problem
Possible Causes
Likely Solutions
Fan will not turn on. 1. Cord not connected.
2. No power at outlet.
3. Tool’s thermal reset breaker
tripped (if equipped).
4. Battery Pack not properly
connected.
5. Battery Pack not properly
charged.
6. Battery Pack burnt-out.
1. Check that cord is plugged in.
2. Check power at outlet. If outlet is unpowered,
turn off tool and check circuit breaker.
If breaker is tripped, make sure circuit is right
capacity for tool and circuit has no other loads.
3. Turn off tool and allow to cool.
Press reset button on tool.
4. Remove Battery Pack, make sure there are no
obstructions, reinsert the Battery Pack according
to its shape (it should only fit one way), and press
firmly until the Battery Pack locks in place.
5. Make sure Charger is connected and
operating properly. Give enough time for
Battery Pack to recharge properly.
6. Dispose of old Battery Pack
properly or recycle. Replace Battery Pack.
Follow all safety precautions whenever diagnosing or servicing the tool.
Disconnect Battery Pack and Charger power supply before service.
