Page 4
For technical questions, please call 1-888-866-5797.
Item 63978
Vibration Safety
This tool vibrates during use. Repeated or long-term
exposure to vibration may cause temporary or permanent
physical injury, particularly to the hands, arms and
shoulders. To reduce the risk of vibration-related injury:
1. Anyone using vibrating tools regularly or for an
extended period should first be examined by a
doctor and then have regular medical check-ups
to ensure medical problems are not being caused
or worsened from use. Pregnant women or
people who have impaired blood circulation to
the hand, past hand injuries, nervous system
disorders, diabetes, or Raynaud’s Disease should
not use this tool. If you feel any medical or
physical symptoms related to vibration (such as
tingling, numbness, and white or blue fingers),
seek medical advice as soon as possible.
2. Do not smoke during use. Nicotine reduces
the blood supply to the hands and fingers,
increasing the risk of vibration-related injury.
3. Use tools with the lowest vibration when there
is a choice between different processes.
4. Include vibration-free periods each day of work.
5. Grip workpiece as lightly as possible (while still
keeping safe control of it). Let the tool do the work.
6. To reduce vibration, maintain the tool as
explained in this manual. If any abnormal
vibration occurs, stop use immediately.
Warning Symbols and Definitions
This is the safety alert symbol. It is used to
alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to
avoid possible injury or death.
Indicates a hazardous
situation which, if not
avoided, will result in death or serious injury.
Indicates a hazardous
situation which, if not
avoided, could result in death or serious injury.
Indicates a hazardous
situation which, if not
avoided, could result in minor or moderate injury.
Addresses practices not
related to personal injury.
Symbology
Canadian Standards Association
Underwriters Laboratories, Inc.
V
Volts
Direct Current
A
Amperes
n0 xxxx/min.
No Load Revolutions per Minute (RPM)
WARNING marking concerning Risk
of Eye Injury. Wear ANSI-approved
safety goggles with side shields.
Read the manual before set-up and/or use.
Keep hands clear of fence area.
DANGER marking concerning
Risk of Amputation.
Keep hands well clear of cutting area.
Specifications
Electrical Rating
120 VAC / 60 Hz / 15 A
Spindle No Load Speed 4,100 RPM
Max. Accessory Diameter
Blade Diameter – 12"
Arbor
1" Round
Capacity of Cut
50° Miter Left / 60° Miter Right
49° Bevel Left and Right
Cutting Capacities
ANGLE
MAXIMUM
CAPACITY OF CUT
RESULT
0° Miter
Height
4-1/2"
Width
12-1/2"
Width
14"
Height
3-1/2"
45° Miter
Height
4-1/2"
Width
8-1/4"
Width
9-3/4"
Height
3-5/16"
45° Bevel
Left
Height
2-7/8"
Width
9-7/8"
Width
14"
Height
1-3/4"
45° Bevel
Right
Height
1-15/16"
Width
12-1/8"
Width
14"
Height
1-5/16"
