background image

Page 4

For technical questions, please call 1-888-866-5797.

Item 56565 

        

f. 

Under abusive conditions, liquid may be 
ejected from the battery; avoid contact. 

If contact accidentally occurs, flush with 
water. If liquid contacts eyes, additionally 
seek medical help.  Liquid ejected from the 
battery may cause irritation or burns.

g. 

Do not use a battery pack or power tool that 
is damaged or modified. 

Damaged or modified 

batteries may exhibit unpredictable behavior 
resulting in fire, explosion or risk of injury.

h. 

Do not expose a battery pack or power 
tool to fire or excessive temperature. 

Exposure to fire or temperature above 
265°F may cause explosion.

i. 

Follow all charging instructions and do 
not charge the battery pack or power tool 
outside of the temperature range specified 
in the instructions. 

Charging improperly or at 

temperatures outside of the specified range may 
damage the battery and increase the risk of fire.

j. 

Have servicing performed by a qualified 
repair person using only identical 
replacement parts. 

This will ensure that 

the safety of the product is maintained.

k. 

Do not modify or attempt to repair the power 
tool or the battery pack except as indicated 
in the instructions for use and care.

l. 

The battery Charger gets hot during 
use.  The Charger’s heat can build up 
to unsafe levels and create a fire 
hazard if it does not receive adequate 

ventilation, due to an electrical fault, or if it is used 
in a hot environment.  Do not place the Charger 
on a flammable surface.  Do not obstruct any 
vents on the Charger.  

Especially avoid placing 

the Charger on carpets and rugs; they are not 
only flammable, but they also obstruct vents 
under the Charger.  

Place the Charger on a 

stable, solid, nonflammable surface (such as a 
stable metal workbench or concrete floor) at least 
1 foot away from all flammable objects, such as 
drapes or walls.  Keep a fire extinguisher and a 
smoke detector in the area.  Frequently monitor 
the Charger and Battery Pack while charging.

Lithium Battery Safety Warnings

LITHIUM BATTERIES STORE 
A LARGE AMOUNT OF ENERGY AND  
WILL VENT FIRE OR EXPLODE 
IF MISTREATED:

a. 

Keep Battery Pack dry.

b. 

DO NOT DO ANY OF THE FOLLOWING 
TO THE BATTERY PACK:
•  Open,
•  Drop,
•  Short-circuit,
•  Puncture,
•  Incinerate, or
•  Expose to temperatures greater than 265°F.

c.  Charge Battery Pack only according 

to its Charger’s instructions.

d.  Inspect Battery Pack before every use; 

do not use or charge if damaged.

Summary of Contents for HD82B













Reviews: