background image

Page 4

For technical questions, please call 1-888-866-5797.

Items 59398 

        

f. 

Under abusive conditions, liquid may be 

ejected from the battery; avoid contact. 

If contact accidentally occurs, flush with 
water. If liquid contacts eyes, additionally 
seek medical help.  Liquid ejected from the 
battery may cause irritation or burns.

g. 

Do not use a battery pack or power tool that 

is damaged or modified. 

Damaged or modified 

batteries may exhibit unpredictable behavior 
resulting in fire, explosion or risk of injury.

h. 

Do not expose a battery pack or power 

tool to fire or excessive temperature. 

Exposure to fire or temperature above 
265°F may cause explosion.

i. 

Follow all charging instructions and do 

not charge the battery pack or power tool 

outside of the temperature range specified 

in the instructions. 

Charging improperly or at 

temperatures outside of the specified range may 
damage the battery and increase the risk of fire.

j. 

Have servicing performed by a qualified 

repair person using only identical 

replacement parts. 

This will ensure that 

the safety of the product is maintained.

k. 

Do not modify or attempt to repair the power 

tool or the battery pack except as indicated 

in the instructions for use and care.

l. 

 The battery Charger gets hot  

 

during use.  The Charger’s heat  

 

can build up to unsafe levels and  

 

create a fire hazard if it does 

not receive adequate ventilation, due 

to an electrical fault, or if it is used in a 

hot environment.  Do not place the Charger 

on a flammable surface.  Do not obstruct 

any vents on the Charger.  

Especially avoid 

placing the Charger on carpets and rugs; 

they are not only flammable, but they also 

obstruct vents under the Charger.  

Place 

the Charger on a stable, solid, nonflammable 

surface (such as a stable metal workbench 

or concrete floor) at least 1 foot away from 

all flammable objects, such as drapes or 

walls.  Keep a fire extinguisher and a smoke 

detector in the area.  Frequently monitor the 

Charger and Battery Pack while charging.

Lithium Battery Safety Warnings

LITHIUM BATTERIES STORE 

A LARGE AMOUNT OF ENERGY AND  

WILL VENT FIRE OR EXPLODE 

IF MISTREATED:

a. 

Keep Battery Pack dry.

b. 

DO NOT DO ANY OF THE FOLLOWING 

TO THE BATTERY PACK:

•  Open,

•  Drop,

•  Short-circuit,

•  Puncture,

•  Incinerate, or

•  Expose to temperatures greater than 265°F.

c.  Charge Battery Pack only according 

to its Charger’s instructions.

d.  Inspect Battery Pack before every use; 

do not use or charge if damaged.

Summary of Contents for HCB86B













Reviews: