Page 6
For technical questions, please call 1-888-866-5797.
Item 57549
SPECIFICATIONS
Battery Type
20V Li-Ion 57373 57306 Hercules
(sold separately)
Charger Type
20V Li-Ion 56224 56559
Hercules (sold separately)
No Load Speed
0 - 3,000 SPM
Stroke Length
Ǝ
SETUP–BEFORE USE
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section at the
beginning of this manual including
all text under subheadings therein
before set up or use of this product.
Functional Description
1. Trigger Lock
2. Trigger
3. Blade Clamp Release Lever
4. Pivoting Shoe
5. Battery Pack (sold separately)
OPERATION
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section at the
beginning of this manual including
all text under subheadings therein
before set up or use of this product.
Tool Set Up
TO PREVENT SERIOUS INJURY FROM
ACCIDENTAL OPERATION:
Make sure that the Trigger is locked and Battery
Pack is removed before performing any procedure
in this section.
Battery Charging
Charge battery after unpacking and before using the
tool. Follow instructions included with battery charger.
Installing / Removing Blade
1. Push the Blade Clamp Release Lever up and
insert the blade (sold separately) fully into the
Clamp. Release Lever to close Clamp.
2. Check that the Saw Blade is firmly locked in
place and that the teeth are pointed downward.
3. To remove blade, push the Blade Clamp
Release Lever up, remove blade from
Clamp and then release Lever.
WARNING!
To prevent serious injury: Before
attaching Battery Pack for each use, wear work
gloves and pull on the Saw Blade to make
sure it is securely locked in the Clamp.
Blade
Pivoting
Shoe
Blade Clamp
Release Lever
Adjusting Pivoting Shoe
1. Press the Pivoting Shoe Lock in and adjust
the Pivoting Shoe to the desired position.
2. Release the Shoe Lock to lock Shoe in place.
1
2
3
4
5
