Page 5
For technical questions, please call 1-888-866-5797.
Items 63381 63382
Specifications
Model HC91K1
Model HC92K1
Battery Rating
20 V / 2.5 Ah
20 V / 2.5 Ah
Battery Type
Li-ion
Li-ion
No Load
Speed RPM
0-600/0-2,000
0-600/0-2,000
BPM
–
0-10,200/0-34,000
Max Torque
576 in-lb
576 in-lb
Chuck Size
1/2"
1/2"
Steel Capacity
1/2"
1/2"
Wood Capacity 1-1/2"
1-1/2"
Masonry
Capacity
–
1/2"
Warning Symbols and Definitions
This is the safety alert symbol. It is used to
alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to
avoid possible injury or death.
Indicates a hazardous
situation which, if not
avoided, will result in death or serious injury.
Indicates a hazardous
situation which, if not
avoided, could result in death or serious injury.
Indicates a hazardous
situation which, if not
avoided, could result in minor or moderate injury.
Addresses practices not
related to personal injury.
Functional Description
1. Jaws
2. Chuck
3. Torque Selector
4. Mode Selector
(Model HC92K1 only)
5. Speed Selector
6. Direction Switch
7. Trigger
8. Work Light
OPERATION
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section at the
beginning of this manual including
all text under subheadings therein
before set up or use of this product.
Tool Set Up
TO PREVENT SERIOUS INJURY FROM
ACCIDENTAL OPERATION:
Make sure that the Trigger is locked and Battery
Pack is removed before performing any procedure
in this section.
Battery Charging
Charge battery after unpacking and before using this
tool. Follow instructions included with battery charger.
Bit Installation
CAUTION!
Wear heavy-duty work gloves
to provide protection when inserting and
removing bits. Bits become very hot during
use. Do not remove bit until it has cooled.
NOTICE: Use sharp bits. Dull, bent, or damaged
bits will cause stress on the drill and/or break.
1. Rotate Chuck counterclockwise until Jaws
are opened enough for bit to fit.
2. Use a bit designed for workpiece type. Place
desired drill, screwdriver, bolt or nut bit into Jaws.
Note:
In addition to single or double-ended
bits, adapters with hexagonal shafts with
matching socket heads can also be used.
3. Rotate Chuck clockwise until bit is held
securely in place, centered between Jaws.
Attaching Belt Clip
Attach Belt Clip to Handle using supplied
Screw. Clip may be attached to either side.
Screw
Belt Clip
8
1
3
6
4
5
7
2
