Page 8
For technical questions, please call 1-888-866-5797.
Item 58260
SAFET
Y
O
PERA
TION
M
AINTENANCE
SETUP
Symbology
Double Insulated
V
Volts
Direct Current
A
Amperes
n0 xxxx/min.
No Load Revolutions
per Minute (RPM)
WARNING marking concerning Risk
of Eye Injury. Wear ANSI-approved
safety goggles with side shields.
WARNING marking concerning Risk
of Respiratory Injury. Wear NIOSH-
approved breathing protection rated
for the hazards in your work area.
Read the manual before
set-up and/or use.
WARNING marking
concerning Risk of Fire.
Do not cover Charger
ventilation ducts.
Charge on fireproof surface only.
WARNING marking concerning
Risk of Electric Shock.
Properly connect Charger’s power
cord to appropriate outlet.
WARNING marking concerning
Risk of Explosion.
Do not puncture, short, or open
battery packs and do not charge
damaged battery packs.
Warning Symbols and Definitions
This is the safety alert symbol. It is used to
alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to
avoid possible injury or death.
Indicates a hazardous
situation which, if not
avoided, will result in death or serious injury.
Indicates a hazardous
situation which, if not
avoided, could result in death or serious injury.
Indicates a hazardous
situation which, if not
avoided, could result in minor or moderate injury.
Addresses practices not
related to personal injury.
Specifications
Battery
Hercules 20
V Li-Ion
(sold separately)
Charger
Hercules 20V Li-Ion
(sold separately)
No Load Speed
n
0
: 8500/min
Spindle Thread
5/8
″
- 11 TPI
Max. Accessory Diameter 5" (125mm)
Grinding Wheel Thickness 0.245" - 0.300"
Cut-off Wheel Thickness
0.035" - 0.095"
Combination Wheel
Thickness
0.125" - 0.195"
