background image

Page 6

For technical questions, please call 1-888-866-5797.

Item 56789 

        

OPERATING INSTRUCTIONS

  Read the ENTIRE IMPORTANT 

SAFETY INFORMATION section at the 
beginning of this manual including 
all text under subheadings therein 
before set up or use of this product.

Vacuum Operation

TO PREVENT SERIOUS INJURY FROM 
ACCIDENTAL OPERATION: 
Turn the Power Switch off, remove the 
Battery Pack, and unplug the Power Cord.

1.  Make sure the Filter is properly installed and 

the Motor Housing assembly is correctly 
latched in place on top of the Tank.

2.  Plug the Power Cord in or  

install the Battery Pack.  
Using gentle force, slide the 
Battery Pack into Motor 
Housing so that the Battery 
Lock Button latches it in place.

3.  Attach the desired accessory 

to the end of Hose.

4.  Turn on the Vacuum by 

turning the Power Switch on.

5.  To prevent accidents, turn the Power 

Switch off, remove Battery Pack, and 
unplug the Power Cord after use.

6.  Release both Latches and lift Motor Housing 

assembly off of the Tank.  Empty the Tank.

Figure A

7.  Replace the Motor Housing assembly 

and close both Latches.  Clean external 
surfaces of the tool with clean and dry cloth.  

Store the tool indoors out of children′s reach.

8.  WHEN WET VACUUMING:

9.  CAUTION! TO PREVENT INJURY FROM 

ELECTRIC SHOCK: Dry your hands and feet 
before touching switch. Do not continue to use 
the vacuum when the tank is full of liquid.

10.  Remove Filter before wet vacuuming.

11.  IMPORTANT! Leave a gap at the tip of the 

nozzle opening to allow air inflow. Do not 
immerse the nozzle completely in liquid.

12.  When the Motor sound becomes higher 

in pitch, the Tank is full and the float 
is closing off the motor intake. 

13.  IMMEDIATELY:

a.  DRY YOUR HANDS AND FEET,
b.  turn the Vacuum OFF,
c.  remove Battery Pack and unplug the Power Cord,
d.  empty the Tank.

Blower Operation

1. 

CAUTION!  To prevent injury:  
Confirm that the Filter is in place 
before using this item as a Blower.

2.  The Hose can be disconnected from the 

Vacuum port and connected to the Blower 
port instead to enable use as a Blower.

Figure B

Battery 

Pack

Summary of Contents for HC023B













Reviews: