33
5.
Set the handle bar into the steering base. Tie-up the 4 hex-socket bolts.
6.
Pull the seat-lock and remove the seat. Install the battery with
the red wire to positive (+) and the black wire to the negative (-).
7.
Check the oil quantity by oil gauge and fill enough unleaded gasoline to operate.
Be sure the arrow mark on the fuel valve arm
（
petcock
）
is set into the
correct position.(on).
8.
Turn on the main switch and try to start-up the engine. In order to use
the electric starter, you need to check the following:
A. Turn on the engine operation switch located on left handle bar
B. Pull the brake lever
C. Press the electric starter bottom to start.
9.
If the vehicle is operating in a very dusty area, please add more oil on
the air cleaner filter.
