Heras HGD230, User Manual

Page: 27 / 146

EN – Translation of the original user manual - 2.1 | 2019 27
4.9 ACCESSOIRES
4.9.1 Loop detection (optional)
A detection loop is an induction loop embedded in the road surface that, with the
assistance of electronics, can detect a vehicle. When the loop detects a vehicle,
the gate will open and/or stay open. Detection loops do not detect people.
4.9.2
Traffic light (optional)
Red/green signal lights that indicate the open/closed position statuses. People are
only allowed to pass through the gate opening when the green light is on.
4.9.3
Flash light (optional*)
A flashing beacon to ensure extra attention before and while the gate is
opening/closing.
A technician can program the switching time.
* In some countries, a flashing light is obligatory.
4.9.4 Remote control (optional)
Remote control to open, stop and close the gate.
See the chapter “REMOTE CONTROL”
Ensure that the remote control cannot come within reach of children and
that it can only be accessed by authorised people. Only use the remote
control in the vicinity of the gate, so that you can see the entire gate.
Note that the button of the remote control can be pressed accidentally, for
instance, when it is in a pocket and this can lead to undesired gate movements.
4.9.5 Lighting (optional*)
Two kinds of lighting can be connected to the HMD230.
•
Passage lighting to enhance the visibility of the passage opening. It can
be lit before and/or while the gate is opening/closing.