20
MOUNTING AND ADJUSTING THE FRONT-ASSIST HANDLE
WARNING:
Always remove thebattery packfrom theproduct when you are
assembling parts, making adjustments, cleaning,or when the product is not in use.
1. Remove the battery pack from
the trimmer
2.
Remove the auxiliary handle
assembly
3.
Loosen the four hexagon socket
screws on the upper cover of the
auxiliary handle,remove the
upper cover of the auxiliary
handle
(Fig. 6).
4.
Loosen the semicircle cross
screw and unscrew the auxiliary
handle
5.
After installation as shown in
figure 4.1, turn the auxiliary
handle back and lock the
semicircle cross screw(Fig.6.1)
6. Attach the front-assist handle and
lowerclampontheshaftandsecure
them by pre-tightening the four
screws. Turn the front-assist handle
upwardssothatitpointstowardthe
top of the handle (Fig. 7).
7. Shorterusersmayadjustthe
handletoa lowerposition(away
fromyou)andtallerusersmay
adjustthehandletoanupper
position(towardsyou).Thehandle
shouldbeadjustedsoyourfront
armwillbe straight when using
thetrimmer.
8.
After installing the upper cover of the auxiliary handle, lock it with the hexagon
socket screw.
Tighten the four screws so that the handle cannot be rotated on the
shaft.
6
7
6.1