HENX H20XZ20-L, Original User Manual, Page: 14 / 16

GB
14
Malfunctions are often caused by minor faults. You can easily remedy most
of these yourself. Please consult the following table before contacting the
vendor. You will save yourself a lot of trouble and possibly money too.
Technical data
Item number
Cordless hedge trimmer
Cutting length 510 mm
Stroke rate 2600 min
−1
Blade Interval:
Φ 15
Net weight :
2.6Kg
Acoustic pressure (L
PA
)* 88dB(A)
Acoustic power (L
WA
)* 77dB(A)
Vibration** front handle: 0.700m/s
2
; rear handle: 0.794m/s
2
*) The specified values are emission values and do not necessarily represent safe workplace
values. Although there is a correlation between emission and emission levels, this cannot
be used to infer whether additional safety measures are necessary or not. Factors which
affect the current emission levels at the work- place, include the type of room, other sources
of noise, e. g. the number of machines operating and other processes taking place in the
vicinity. Permitted workplace values can differ from country to country. This information is
designed to help the user to better assess the dangers and risks. Determination of noise
emission values in accordance with EN 60745-1.
**) The specified vibration emission value was measured in accordance with a normal test
procedure and can be used in order to compare one tool with another. The specified
vibration emission value can also be used for an introductory evaluation of the exposure.
The vibration emission value may fluctuate from the specified value during actual use of
the power tool. These fluctuations will depend on the way in which the power tool is used.
Try to keep vibrations to a minimum. One method of reducing the vibration load is, for
example, limiting the length of time you work with the tool. All parts of the operating cycle
must be taken into account for this purpose (for example, also including times in which the
power tool is switched off and times in which it is switched on, but is running without load).
Determination of vibration emission values in accordance with EN 60745-1 & EN 60745-2-
15.
Accessories
Accessory
Battery pack : H20B20&H20B40
Battery charger: H20KC40&H20MC10
Charging time:
H20B20: 240(min) standard charger ; 60 (min) quick charger.
H20B40: 480(min)standard charger ; 120 (min) quick charger.