HENX A40LJ14B01 Operator'S Manual Download Page 69

Page: 69 / 77

TROUBLESHOOTING

WARNING:

Always protect your hands by wearing heavy gloves when

performing any maintenance on the saw chain. Always remove the battery pack when

servicing or transporting the chain saw.

PROBLEM

CAUSE

SOLUTION

Motor does not

run.

◾

The battery pack is not

attached to the chain saw.

◾

Attach the battery pack to the chain

saw.

◾

There is no electrical contact

between the saw and battery.

◾

Remove the battery, check contacts

and reinstall the battery pack.

◾

The battery pack is depleted.

◾

Charge the battery pack.

◾

The battery pack or chain

saw is too hot.

◾

Allow the battery pack or chain saw

to cool until the temperature drops

below 152°F (67°C).

◾

The lock-off button is not

depressed before pressing

the trigger switch.

◾

Press down the lock-off button and

hold it, then depress the trigger

switch to turn on the chain saw.

◾

Chain brake is engaged.

◾

Pull the chain kickback brake handle

backward toward the front handle.

◾

Saw chain is bound in the

wood.

◾

Release the trigger switch; remove

the saw chain and guide bar from the

wood, then restart the chain saw.

Summary of Contents for A40LJ14B01














































































Search results

Summary of Contents for A40LJ14B01

Reviews:

Related manuals for A40LJ14B01

Brands by name

Popular brands

HENX A40LJ14B01, Operator'S Manual

Search results

Summary of Contents for A40LJ14B01

Reviews:

Related manuals for A40LJ14B01

Brands by name

Popular brands