2) Pairing the headset with a Bluetooth cell phone
Prior to using the headset for the first time, you have to pair it with a
Bluetooth-enabled cell phone. The pairing procedures are subject to
different models of cell phones. Please refer to your cell phone user’s
manual for further information. The general pairing procedures are as
follows:
1)
Keep your headset and phone within 1 meter when pairing;
2)
Make the headset enter pairing mode (please refer to “How to enter
pairing mode);
3)
Activate your cell phone’s Bluetooth function and set your cell phone to
search for Bluetooth devices within range, and select “BTH033” from the
list of devices shown;
4)
According to the indication, enter password or PIN No: “0000”;
5)
If prompted by your cell phone to connect, select “Yes” (this will vary
among cell phone models);
6)
After successful connecting, blue LED flashes twice every 4 seconds or
flashes three times every 4 seconds.
Remarks:
If pairing is failed, please turn off the headset first and then re-pair
according to steps 1
～
6 mentioned above.
After pairing is successful, the headset and the cell phone will remember
each other, they will no need to re-pair next time. The headset can
remember 8 paired devices, when the number of paired devices exceeds
8, the first one will be replaced.
Every time the headset is turned on, it will connect to last connected
device automatically. If you want to pair it with other devices, please turn
off the Bluetooth function of last connected devices first and pair the
headset with the new device according to steps 1
～
6 mentioned above.
3) Pairing the headset with a Bluetooth transmitter
You can connect the headset to a Bluetooth transmitter to enjoy music
wirelessly. Hereby take BTT010 (Bluetooth transmitter for iPod and iPhone,
not included) for example. The pairing steps are as follows:
5