2
INITIAL OPERATION
Opening the Operational Environment:
Open the web browser of the device used for control (we recommend using Firefox, other
browsers are also suitable) and enter the following IP address in the address line:
192.168.4.1
Initially, it may take a few seconds until the connection is set up and all buttons are
displayed correctly. The process should be completed after max.10s, otherwise, please
use your browser’s “refresh“ function for a new connection attempt.
This procedure does not install any software on the control device. The turntable is ac-
cessed via a local network and control does not depend on the operating system or
an Internet connection.
In case the connection is not established or the buttons on the user interface do not
function, please follow the instructions starting on page 5 to set up a connection. You must
follow these steps for Apple iPhone
®
or Apple iPad
®
.
The turntable is now ready for operation.
On the following page, please find the function instructions of the user
interface.