Servicing the device
57
Servicing the device
Caring for and cleaning the device
WARNING
Heat is generated during the operation of the device.
Touching the device at the front can lead to severe burns.
Let the device cool down for 5 to 15 minutes before
cleaning.
To guarantee electrical safety, the device must be cleaned regularly. To
clean it, proceed as follows.
Regularly clean the outside of the device with a dry cloth.
Regular inspection
National safety regulations – e.g. the Industrial Safety Act (BetrSichV) and
DGUV Regulation 3 (formerly BGV A3) in Germany – demand the
inspection and maintenance of electrical systems and equipment at regular
intervals. The operating safety of devices and accessories must be checked
regularly. An annual inspection of the devices should be carried out for the
safety of the users and to retain the value of the system.
The regulations specified above (BetrSichV and DGUV Regulation 3
(formerly BGV A3)) apply to Germany; please observe the corresponding
local regulations in your country.
Maintenance schedule
Regularly clean the device as described in the “Caring for and cleaning
the device” section above.
Grease the thread of the knurled screw for the stand adapter every 1-2
years.
Maintenance
Time period
Check the operating safety of the device
Every 12 months
Check the operating safety of
accessories
Every 12 months
Summary of Contents for FORIS 1000
Page 72: ......
