Hensel-Visit COPY ONE, User Manual

Page: 18 / 24

User manual Copy One
18 HENSEL-VISIT GmbH & Co. KG
Maintenance Plan
Clean the system regularly as described in the section ’Cleaning’. Please
lubricate the locking bolt thread every 1-2 years.
Cleaning
DANGER Danger of electric shock
Danger of electric shock exists during installation and
removal of system components.

Switch off unit via the power switch.

Disconnect the unit from the mains voltage.

Wait 15 minutes for the discharge of the
capacitors.
CAUTION Risk of burns from reflector and flash unit
Heat which may cause burns develops at the head
during the flash process.

Before removing the reflector allow reflector
and flash unit to cool off.
The flash unit needs little maintenance by the user. The outside of the
equipment must be cleaned periodically with a dry cloth of dust and dirt to
ensure electric safety.
Periodic Safety Checks
The national health and safety at work regulations - BetrSichV and DGUV
Regulation 3 (formally known as BGV A3) – mandate periodic checks and
maintenance of electrical systems and devices. Generators and
accessories must be checked regularly for operational safety. A yearly
check of devices serves to ensure user safety and retains system value.
The above mentioned regulations apply to the whole EU area. If you live
outside the EU, please observe your local regulations.