Henry Tools 45 Series, General Safety And Maintenance Manual

Page: 3 / 6

HENR
Y
T
OOLS,
INC.
Ph:
(216) 291-1011 or (800) 826-5257
General Operators Instructions and Service Manual
www.HenryTools.com | Page 77
Revised 03/05/12
For additional product information visit our website.
Original Style
Tools Pre-Year 2009
PART NO. DESCRIPTION
400-G-11 FRONT BEARING
400-G-17 Alum Side Exhaust Sleeve
400-G-17-S Steel Side Exhaust Sleeve
400-G-4-GL Aluminum Backhead
400-G-4-GLS Steel Backhead
400-G-26 THROTTLE LEVER
400-G-34 SPRING
400-G-38 COLLET NUT
400-G-42 3/8-24 FLANGE (2”-3” WHEELS)
400-G-47 3/8-24 JAM NUT
400-2G CYLINDER WITH PIN INSTALLED
400-5 ROTOR
400-6 ROTOR BLADE (5 are required)
400-7 FRONT ENDPLATE
400-10 KEY
400-44 ROLL PIN
400-51 0-RING
402-126 SAFETY LEVER
402-127 SAFETY LEVER PIN
402-128 LOCKOUT LEVER
402-129 SAFETY LEVER SPRING
402-134 MUFFLER
404-1 ANGLE HEAD
404-2 BEARING CAP
PART NO. DESCRIPTION
404-3 UPPER OUTPUT SPINDLE BEARING
404-4 KEY
404-6 WAVY WASHERS(2 required)
404-7 LOWER SPINDLE BEARING
404-9 REAR MOTOR BEARING
404-14 SPINDLE
404-19 REAR ENDPLATE
404-20 MOTOR SPACER
404-38 BEARING COVER
404-39 SNAP RING
404-40 DEAD HANDLE
404-41 MOTOR CASE ALUMINUM
404-44 DEAD HANDLE OFFSET
405-5-625 5/8-11 X .980 OUTPUT SPINDLE
405-10 GEAR SET
405-15 GEAR SPACER SLEEVE
405-17 3/8-24 X .980 OUTPUT SPINDLE
540607 COLLET OUTPUT SPINDLE
405-17-5/8” 5/8-11 X .980 OUTPUT SPINDLE
500-G-44 3/8 ID FLANGE ( for 4”-5” WHEELS)
700-34 5/8-11 JAM NUT
700-37 THROTTLE LEVER PIN
1100-680 5/8 I.D. FLANGE
1100-682 “(6”” OR SMALLER WHEELS)
3/8 I.D. FLANGE”
591028 SCREW
591040 STAR WASHER
591048 BRACKET BOLT
591106 SET SCREW (SPECIFY SPEED)
592016 SNAP RING
594016 0-RING
832636 GASKET
841553 3/8 NPT TO 1/4 NPT BUSHING
844302 0-RING
869311 THROTTLE VALVE CAP
834782 THROTTLE VALVE-INCLUDES 844302
4503 3” TYPE 27 GUARD
4504 4” TYPE 27 GUARD
4505 5” TYPE 27 GUARD
490-3 PIN SPANNER
102-SPWR WRENCH FOR SANDING PAD NUT
1100-044 7/16” WRENCH
1100-050 1/2” WRENCH
MODELS
45 RA
45 RAC
45 RAZ
45 RAS