7
E
N
G
LI
S
H
4. Press the cuff to make sure that it is attached securely. The cuff
should not be too tight or too loose. It should be easy to insert two
fingers between the cuff and the upper arm.
5. The mark "INDEX" on the cuff must point to area "NORMAL"
(22-32 cm). This means the cuff size is correct. If mark "INDEX"
points to the area beyond area "NORMAL", please consult your
dealer for another cuff size.
6. If it is difficult to secure the cuff evenly to the user's upper arm, a
cone shape is also acceptable.
7. Clothes should not restrict the area of the upper arm, if sleeve is
tight then remove clothing to allow accurate measurement.
SETTING THE DATE AND TIME
The function provides accurate measuring time for each measure-
ment. Preset the date and time correctly before use as follows:
1. When the device is connected to power supply at first time, the dis-
play will show as Fig. 1.
2. Press and hold button "PRESET"
3. Press button "M1" or "M2" to add or subtract the number, and press
button "START" for confirmation.
4. When the year setup is finished, the month number will flash au-
tomatically. Please follow the same instruction as above to set
month, date and time.
5. Press button "START" to finish setup.
