Henny Penny Velocity OXE-100, Operation Manuals

Page: 91 / 118

Zigbee
Radio
79
1 10 0..2 2..1 1 IIn nsstta allll tth he e H Ha arrd dw wa arre e
1 1))
On a table or countertop, position the radio adapter so that the terminal block screws are face-
up. Attach wire ZB3 to the left-outside terminal (1), and attach wire ZB4 to the right of the left-
outside terminal (2). See
Figure 10-1 Connecting Wires to Terminal Block, page 79 .
Figure 10-1 Connecting Wires to Terminal Block
IIN NF FO O: Wire numbers are printed on the exterior insulation of the wire.
2 2))
Using a Phillips head screwdriver, remove the two screws securing the control board and lower
it down.