ACCESS PANEL
Tools:
Phillips screwdriver
In most procedures of the maintenance
section, the access panel must be removed
from the top of the module. This access
panel can easily be removed by taking out
the four screws that fasten it to the module
shell.
MODULE HOUSING REMOVAL
Tools:
Phillips screwdriver
In some procedures the complete module
top will need to be removed to allow better
access to some components.
1. Remove the front and back panel
screws.
2. Remove the 6 side screws.
3. Remove the 4 top screws.
4. Pull module top from unit.
POWER SWITCH
1. Disconnect the electrical supply to the
cabinet.
WARNING: Place the power switch in the
OFF position and unplug the power cord.
Failure to do so could result in electrical
shock.
2. Remove the module housing.
3. Squeeze in on the clips which hold the
switch in place and pull out from the front.
14
