Henny Penny CMC-103 Operator'S Manual Download Page 23

  Model CMC/CMR-103,104,105,106,107

4-1.    INTRODUCTION

This section identifies and lists the replaceable parts of the
Henny Penny Cold Top.

4-2.    GENUINE PARTS

Use only genuine Henny Penny parts in your cabinet.  Using a
part of lesser quality or substitute design may result in cabinet
damage or personal injury.

4-3.    HOW TO ORDER

Once the part you want to order has been found in the Parts
List, write down the following information:

1.

From the Parts List

(Sample)

Item Number 1
Part Number 56242-001
Description

Side Glass-Flat-Clear

2.

From the data plate

(Sample)

Product Number  CMC.100
Serial Number      0001
Voltage

     120V

4-4.    PRICES

Your distributor has a price parts list and will be glad to inform you
of the cost of your parts order.

4-5.    DELIVERY

Commonly replaced items are stocked by your distributor
and will be sent out when your order is received.  Other parts
will be ordered by your distributor from Henny Penny Corpora-
tion.  Normally, these will be sent to your distributor within three
working days.

4-6.    WARRANTY

All replacement parts (except lamps and fuses) are covered
under warranty for 90 days against manufacturing defects
and workmanship.  If damage occurs during shipping, notify
the carrier at once so that a claim may be properly filed.  Refer
to warranty on the front of this section for other rights and
limitations.

Recommended replacement parts, stocked by your distributor, are
indicated with 

√√√√√

 

in the parts lists.  Please use care when ordering

recommended parts, because all voltages and variations are marked.
Distributors should order parts based upon common voltages and
equipment sold in their territory.

4-1

        206

SECTION 4.  PARTS INFORMATION

4-7.   RECOMMENDED

SPARE PARTS FOR
DISTRIBUTORS

Summary of Contents for CMC-103





























Reviews: