BIO Pellet Stoves
12
To use this option, after installing the remote thermostat, set the ambient temperature below the
minimum value of 6°C with the (P2) button on the display. When "t-E" appears in the display, the function
will be active: from this time the room temperature must be set by the external thermostat.
Ventilation
The air vented by the motoventilators keeps the stove temperature low preventing the materials the
stove is made of from excessive stress and heating the domestic environment more homogeneously.
Make sure you periodically test if the ventilator works properly.
•
USE
Basic instructions
The stove that you have bought uses fuel in pellets. This type of material is made of natural wood chips
from the wood processing industry. A special process that requires neither binders nor additives is used
to compress the chips in industrial machinery at high pressure so that they become solid wood pellets.
Use of raw materials that have not been made into pellets is ABSOLUTELY PROHIBITED in our stove.
Failure to respect this instruction will invalidate all guarantees and may have a negative effect on the
safety of the apparatus.
For the first two or three times when you light the stove, bear in mind the following advice:
-
Children should not be present, because the vapours emitted by the stove may be harmful to health.
Adults should also avoid staying for long near the stove.
-
Do not touch the surfaces as they may still be unstable.
-
Air the room well several times.
-
The surfaces will be fully hardened after several heating processes.
-
Operate the stove at medium Power for 2-3 days (display A will show the number 3) so that the
mechanical parts are able to settle into smooth running.
IMPORTANT!
Continuous operation of the stove at maximum power may shorten the expected life of the electrical
components, we therefore advise against it. We suggest using the stove at maximum power only at the
start, in order to bring the room quickly to the desired temperature (for an hour and a half for example).
The stove is designed for using pellets with a diameter of 6-7 mm. If you need to use pellets of different
diameters, an authorised servicing engineer must first take it away for adjustment.
Introduction
It is recommended to follow the hereunder guidelines for the best functioning and least consumption. If
the installation is well carried out and the fumes pipe is efficient the lightning of the pellets will be very
easy. The procedure is as following: empty and clean the brazier, verify there are enough pellets in the
tank. If you start the stove for the first time you should wait for the cochlea to be filled with pellets and
that requires at least three attempts at starting, as the brazier is empty. Make sure the door is well close.
ATTENTION!
Don’t use any kind of inflammable liquid during the lightning (alcohol, petrol, gasoline, etc.).
At the first starting you should keep the fire lightning slowly for at least 24 hours to allow the materials
the stove and the furnace are made of to settle the inner elastic stress avoiding permanent damages.
Some greasy working residuals and paints can produce smell and smoke during the first hours of
functioning, we recommend ventiliating the room as they can be harmful to people and pets.
ATTENTION! The programming parameters from 1 to 5 are set by the company and can be changed
only by an authorised technician.
Summary of Contents for BIO 80
Page 32: ...BIO Pellet Stoves 31...
