Activity *
1-D 1-W 6-M
1-Y
4-Y
Check the plastic lid for cracks (if applicable).
X
Inspect the lid springs. Pay additional attention to damage and the
fastenings of the lid springs.
X
Lubrication
Replace the oil of the vacuum pump. See Technical Data on page
38 for the type of oil.
X
Replacement
Replace the sealing wires.
X
Replace the silicone rubber of the silicone holders.
X
Replace the lid gasket.
X
Replace the oil exhaust filter.
X
Contact your dealer for professional servicing.
X
Replace the plastic lid (if applicable).
X
* 1-D = Daily, 1-W = Weekly, 6-M = Every 6 months, 1-Y = Annually, 4-Y = Every 4 years
7.3 Cleaning the Machine
Never clean the machine using a high pressure cleaner.
Do not use any aggressive or toxic cleaning agents.
Do not use any cleaning agents containing solvents.
1.
Clean the surfaces with a soft, damp cloth. You can also apply a cleaning agent to the
machine and wash it with clean water.
7.4 Replacing the Sealing Wire
Depending on the specifications of your machine, you can have one of the following (combinations
of) sealing wires:
•
Wide seal: one wide sealing wire
•
Double seal: two sealing wires
•
Trenn seal: one sealing wire and one cutting wire
The process of replacing the sealing wires is the same for all types.
Replace the sealing wires if the wire and/or the Teflon tape are damaged, or as specified in
Maintenance Schedule on page 24.
Maintenance 25