After saving the programmes and labels into the configurator, you can save the file with the labels
or programmes on your computer or directly on a USB stick:
5.
Click on Save all programmes/labels to export programmes or labels.
6.
Choose Save as to save the file on the correct location.
Do not change de name of the files labels.txt and programs.txt. Otherwise the
machine will not be able recognise the files.
Use an empty USB stick to export the files to your machine.
To import the programmes and labels into the machine, follow the steps below:
7.
Insert a USB stick into the USB port of the machine.
8.
In the menu, go to Import/Export and import the data.
Your machine must be equipped with the chosen options, since not all options are standard on our
machinery.
6.2.5.2 Functions
The built-in functions of the machine can be enabled or disabled by the owner under Settings. See
Changing the ACS Settings on page 34. The options of the various programmes can then be
programmed.
6.2.5.3 Vacuum
During the cycle, the air is removed from the chamber until the set pressure has been reached
(sensor-controlled).
To set the vacuum level, follow the steps below:
1.
Press the cursor keys
◄
and
►
and select the program Vacuum.
2.
Press Enter to open the menu.
3.
If Vacuum is not enabled, enable it. Press Enter and use the cursor keys
▲
and
▼
to turn ON
Vacuum. Press Enter.
4.
Use the cursor keys
▲
and
▼
to go to the value for the Vacuum and press Enter.
5.
Set the desired value using the cursor keys
▲
and
▼
and press Enter.
6.
Press the cursor key
◄
to return to the menu.
7.
Close the lid to start the vacuum cycle.
6.2.5.4 Vacuum (automatic)
During the cycle, the air is removed from the chamber until the set pressure has been reached
(sensor-controlled).
To set the vacuum level automatically, follow the steps below:
1.
Press the cursor keys
◄
and
►
and select the program Vacuum.
2.
Press Enter to open the menu.
3.
If Vacuum is not enabled, enable it. Press Enter and use the cursor keys
▲
and
▼
to turn ON
Vacuum. Press Enter.
4.
Use the cursor keys
▲
and
▼
to go to the value for the Vacuum and press Enter.
Operation 40