Figure 7: Possible Display Modes
6.2.1.1 Changing the ACS Settings
To prevent unauthorised changing of the settings and adjustments, there are different levels of
authorisation: user and owner. Authorisation codes for users or owners allow access to the various
levels. User access to change the settings of the machine is limited. The default user code is 0000.
Users can only activate the printer via the printer icon in the navigation mode.
Owners of the machine are authorised to change the machine settings as well as all function
settings. An owner code is requested when the menu icon is selected in navigation mode. This
owner code is 1324. When the owner code has been entered, the machine settings menu will
be opened. When logged in, the function settings can also be changed. To do so, return to the
navigation mode by pressing
◄
.
The machine remembers the last authorisation code used, even when the machine has
been turned off. Therefore, it may be necessary to manually change the authorisation
setting when you are done.
The basic functions below allow you to adjust the machine and/or function settings:
What to do?
Action
Selecting a different setting
Press
▲
or
▼
.
Editing the selected setting
Press Enter.
Adjusting a variable
Press
▲
or
▼
.
Conforming a variable
Press Enter once the desired variable has been
found.
Return to the navigation mode
Press
◄
when all settings have been set to re-
turn to the navigation mode.
Figure 8: Overview of the Menus on page 35 shows all possible settings for all
functions.
Operation 34