EQUIPMENT
Instruction Sheet
200 ml Manual Applicator, 983436
400 ml Manual Applicator, 983438
DUAL
CARTRIDGE
LOCATING
TAB
RELEASE CATCH
PLUNGER
RETAINING NUT
STATIC MIX NOZZLE
200 ml
RELEASE
CATCH
RATIO SELECTOR
400 ml
CARTRIDGE
TRAY
EJECTION BUTTON
INSTALLATION INSTRUCTIONS:
Both applicators are fully assembled and ready to
dispense 1:1 and 2:1 dual cartridges.
For the 400 ml Manual Applicator only, select ratio.
For extended use, counterbalancing of applicator
is recommended.
1. Retract Plunger
Press release catch (red button on 200 ml Manual
Applicator and metal lever on the 400 ml Manual
Applicator) and fully retract plunger.
2. Insert dual cartridge
Insert dual cartridge into cartridge tray, ensuring that
the locating tab slides into groove. Push down until
locked into position.
3. Install static mix nozzle
To remove plug from cartridge, leave metal clip in
place and unscrew retaining nut. Install mix nozzle
(sold seperately) on cartridge and secure in place
with retaining nut. Dispense product by squeezing
trigger. When dispensing is complete, press release
catch to relieve pressure.
Note: If dispensing is restricted, product may be cured
in static mix nozzle. Replace nozzle.
4. Removal of cartridge
Press release catch and fully retract plunger. Press
ejection button on cartridge tray.
Replacement Parts & Accessories
Part No.
For 200 ml Applicator 983436:
• 1:1 / 2:1 Cartridge Tray
983724
• 1:1 / 2:1 Plunger Kit
985543
For 400 ml Applicator 983438:
• 1:1 / 2:1 Cartridge Tray Kit
983725
• 4:1 Conversion Kit (optional)
984211
For both Applicators:
• 6 mm Static Mix Nozzles
983442
• 8 mm Static Mix Nozzles
983443
