Installation & Programming Manual
Page 15
to consult and modify, if
necessary, the values
acquired from the line or to
create new recipes
Press the Parameters button to access the section for configuring the variables to be managed
in the recipes.
The variables which can be selected are active depending on the hardware and software
configurations of the analysis equipment.
3.5.1. Capture from Line
With the Capture from Line function it is possible, in real time, to call up the parameters
operating on the line.
These parameters will be retained in a temporary memory, after which they can be modified
and/or saved and/or sent to a specific production line. After the selection has been made a
table is displayed showing a list from which to draw the production parameters. These may
vary depending on the hardware and software configuration of the analysis equipment.
3.5.2. New Product
By selecting New Product, the user can create a new recipe starting from the default values
stored in AT-05 Panel if necessary
Use the Parameters field located on the right-hand side of the panel to consult and modify, if
necessary, the default values.
3.5.3. Save On Disk
Save the recipes with the data called up from the line or create as new products by selecting
the Save on Disk button. If the save date operation is not executed, for example because the
operator does not want to save any modifications but only view the current parameters of the
selected product, all operations and any modifications made to the parameters will not be
saved.
3.5.4. Recall from Disk or Delete
By selecting Recall from Disk or Delete Product a box appears which allows the user to select
the required product from the ones stored in the memory.
Summary of Contents for Lineguard AT05
Page 1: ...Manual Lineguard AT05 ...
