background image

Henkel, Inc. 

P.O. Box 1322   *   Hammond, Louisiana   *   70404   *   (985) 345-2171 

www.keenovens.com 

 

Models KF-100A Flux Holding Oven 

Installation Instructions & Repair Parts List

 

 
 

 

One Year Limited Warranty 

 
 

 

Henkel, Inc. warrants its products against defects in material and workmanship. Henkel, 
Inc. will either repair or replace without charge any properly installed product which fails 
under normal operating conditions within one year from date of installation, provided it is 
returned to our factory, transportation prepaid, and our inspection determined it to be 
defective under the terms of this warranty. The warranty covers only equipment 
manufactured by Henkel, Inc., and does not extend to transportation, installation, or 
replacement charges at the buyers’ facility; nor does it apply to any other equipment of 
another manufacturer used in conjunctions with Henkel, Inc. equipment. No other 
warranty, expressed or implies exists beyond that included in this statement. 

 

Keen Ovens

Model KF-100A Flux Holding Oven

Specifications

Capacity 125lbs 

Flux

Voltage (Specify)

120V                          240V

Wattage

500W                         500W

Thermostat

Factory Preset/ Field Adjustable

Temperature

Preset 275ºF : Range 100ºF-400ºF 

Insulation

2" Thermal Insulating Wool

Interior Dimensions

12" X 16" X 22"

Net Weight

95 lbs.

Shipping Weight

170 lbs.

Shipping Dimensions

30" X 48" X 30"

 

Summary of Contents for Keen KF-100A









Reviews: