11
14.
CAUTION: the vapors from the flushing solvent will be emitted and should be
directed into a paper towel or similar cloth. If an exhaust hood or fume filtration
system is available, it should be used.
15.
Continue to dispense air for approx. 1 minute or until all solvent has been
removed from the feed lines.
16.
While the air is being forced thru the feed lines, lightly tap the feed line leading
from the reservoir to the dispense valve.
17.
Once you are confident that all of the remaining solvent has been purged from
the feed line and valve, the process is complete.
18.
Rotate the Luer Check Valve clockwise until tight.
NOTE: the operator must wear Safety glasses and proper gloves while this procedure is being
performed.
9
Accessories and Spare Parts
Optional Accessories and System Components (sold separately):
Dispensing From a Reservoir
Loctite
®
Dual Channel
Integrated Semi-Automatic Control Dispenser: PN 1390321 &
1390322
Loctite
®
Bond-A-Matic 3000 Reservoirs, 0 to 100 psi : PN 982723, 982724, 982727
Dispensing From a Syringe
Loctite
®
Precision Air Regulator: PN 98099 (IDH# 855974)
Elbow fitting, 1/8” NPT male x male luer : PN 98095 (IDH# 698608)
Stainless steel reducing adapter, 1/8” NPT female x #10-32 male: McMaster Carr
part# 2684K19 or similar
