①
PTC heat element
②
air outlet
③
handle
④
enclosure
⑤
stand feet
⑥
air inlet
⑦
fan leaf
⑧
cord anchorage
⑨
switch
⑩
thermostat
⑾
power cord with plug
Control panel
1> Two levels switch with 3 positions, heating level I : 1000W
、
level II : 2000W
。
2> Adjustable thermostat, 0
～
40 Celsius
，
270 degree.
3> First turn the thermostat to the maximum position
，
switch the appliance on with
the biggest power input
，
when the desired room temperature is reached
，
turn the
thermostat anticlockwise till it turns off (a “click ” is heard). The thermostat then
will automatic turn on and off to keep the room temperature constant.
4> It’s normal when odor is blew off from the PTC heating element by the first use. It
will cease to happen when used again.
5>
After the use, follow the below steps to operate the heater: turn off the thermostat and switch(OFF
position), unplug and let the appliance cool down in the air. When the appliance cools down
completely, put it in the packaging. Avoid to store the unit before the heating element doesn’t cool
down, it’s dangerous to store the hot unit.
3. SAFETY INSTRUCTIONS
Warning:
In order to avoid overheating, do not cover the heater.
It is important to read following instructions carefully before using the appliance
：
1>
Connect the plug only in an earthed socked with rated voltage.
2> Children should be supervised to ensure that they do not play with the appliance. The
appliance in not intended for use by person (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge. If the appliance is
damaged, do not use it any more.
3> The heating device shall not be installed below a socket-outlet.
4> Do not use outdoors or in humid place. Never use the heater in the bathroom, shower or
near a swimming pool etc.