General instructions
Use only the supplied pressure regulator.
This appliance is only suited for propane gas.
Check that there are no kinks in the gas hose.
The length of the gas hose may not exceed 1,5 meters.
Only use this appliance in the open air.
Keep the griddle away from (easily) flammable material.
Do not move the gas griddle during use.
Always close the tap on the gas cylinder if the griddle is no longer being used.
The user must not change parts of the appliance that are sealed by the manufacturer.
Install the griddle as level as possible.
WARNING: Some parts of the appliance can become hot.
Keep children away from the gas griddle.
Connecting the gas bottle
1 = main tap
2 = pressure regulator
3 = gas hose
4 = gas bottle
Attach the pressure regulator to the gas bottle using the
large brass nut. Always ensure that the rubber-sealing
washer is present
in the nut
.
(
NB
. This rubber washer is not
required for UK-type pressure regulators).
Tighten the nut
well. Note that the nut has a
left-hand
thread. Check the
connections for leaks using a soap and water solution.
Igniting the gas griddle
Place the grill grid.
Turn the knob to the “
normal
" position. Keep the knob pressed and press the ignition button a
few times until the burner is burning completely. Keep the knob pressed in for approximately a
further 10 seconds. The burner will continue to burn.
Turning off the gas griddle
Turn the knob completely to the right. The burner will go off.
Note!
After turning off the burners, wait approximately 10 minutes before reigniting the burners.
After turning off the burners, always turn off the main tap on the gas cylinder!
Maintenance
After every use:
- Clean the griddle.
-
Clean the grease holder.
