5
EN
Grounding Installation
This appliance is classified as the protection class I
and must be connected to a protective ground.
Grounding reduces the risk of electric shock by
providing an escape wire for the electric current.
This appliance is equipped with a cord having a
grounding wire with a grounding plug. The plug
must be plugged into an outlet that is properly in-
stalled and grounded.
Technical specifications
240502
240519
Supply voltage
230V~ 50-60Hz
230V~ 50-60Hz
Power consumption
1000W
2 x 1000W
Drain taps
No
Yes
Container capacity
10 L
2 x 10 L
Technical specifications are subjected to change without prior notice.
Operation
• Fill the container with water only between the
MIN
and
MAX
level.
• Connect the power plug with a suitable electri-
cal outlet. Make sure the electrical power supply
voltage rating corresponds with the power supply
details shown on the appliance rating label.
• Turn ON the appliance by pressing the green ON/
OFF switch.
• Select the temperature by turning the tempera-
ture control (up to 85ºC) clockwise. Then, orange
indicator lights up.
• Once the set temperature is reached, the orange
indicator will go off automatically.
• Now, you are ready to put the sausages into the
container for heating.
•
Risk of splashing!
Slowly immerse the sausages
into the water.
Note:
• Only water can be poured into the container.
• Check the water level regularly during operation.
Add water if the water level below MIN level.
After use
• Turn OFF the appliance by pressing the green
ON/OFF switch.
• Unplug the appliance from the electrical outlet.
• Allow the appliance & water to cool down.
• Take care when pouring out the water & using
the handles or drain taps (for item 240519 only).
Cleaning and maintenance
• Always remove the plug from the socket before
cleaning the appliance.
• Beware: Never immerse the appliance in water
or any other liquid!
• Clean the outside of the appliance with a damp
cloth (water with mild detergent).
• Never use aggressive cleaning agents or abra-
sives. Do not use any sharp or pointed objects.
Do not use petrol or solvents! Clean with a damp
cloth and detergent if necessary. Do not use
abrasive materials.
• Clean the ventilation slots (if applicable) with the
vacuum cleaner.
• Regularly descale the bottom of the water con-
tainer.
