Hendi 212028, Manual

Page: 4 / 68

4
EN
• Never use accessories other than those recommended by the manufacturer. Failure to do
so could pose a safety risk to the user and could damage the appliance. Only use original
parts and accessories.
• This appliance should not be operated by persons with reduced physical, sensory or mental
capabilities, or persons that have a lack of experience and knowledge.
• This appliance should, under any circumstances, not be used by children.
• Keep the appliance and its power cord out of reach of children.
•
WARNING:
ALWAYS switch off the appliance and unplug from power socket before
cleaning, maintenance or storage.
Special Safety Regulations
• This appliance is designed only for making crepe only. Any other use may lead to damage
of the appliance or personal injury.
• Use the appliance only as described in this manual.
• This appliance should be operated by trained personnel in kitchen of the restaurant,
canteens or bar staff, etc.
• CAUTION! HOT SURFACE! The temperature of the heating surface and other
accessible surface is very high during use. Touch the temperature control knob only.
• An equipotential bonding terminal is provided at the rear side of the appliance to
allow cross bonding with other equipment.
• When this appliance is to be positioned in close proximity to a wall, partitions, kitchen
furniture, decorative finishes, etc., it is recommended that they are made of non-
combustible material; if not, they shall be cladded with a suitable non-combustible heat
insulating material, and that the closest attention be paid to fire prevention regulations.
• Do not place the appliance on a heating object (gasoline, electric, charcoal cooker, etc.).
Keep the appliance away from any hot surfaces and open flames. Always operate the
appliance on a level, stable, clean, heat-resistant and dry surface.
• WARNING: Keep all ventilation openings in the appliance clear of obstruction.
• WARNING: If the heating surface is cracked or damaged. Do not use the appliance.
• Do not cover the appliance during operation.
• Allow at least 20 cm spacing around the appliance for ventilation purpose during use.
• Do not use hard utensils to hit the heating plate surface. Do not use water jet flush
directly with water as the parts will get wet and electric shock might be resulted.
• CAUTION! Securely route the power cord if necessary in order to prevent unintentional
pulling or contact with the heating surface.
• Clean the appliance after each use for the reason of hygiene.
• WARNING: Allow completely cool down before cleaning and storage.