Hendi 209202, User Instructions

Page: 7 / 20

Function:
This deep fryer is designed with a unique cold zone, this extends the usable life of the fat
considerably.
Safety instructions:
Only connect the appliance to an earthed 230 VAC electrical socket.
Avoid overloading.
Turn off the appliance after use with help of the switch.
Always remove the plug from the socket when filling or cleaning the deep fryer.
The electrical installation must satisfy the applicable national and local regulations.
Technical details
deep fryer 1x8l deep fryer 2x8l
Model 209202 209301
Supply voltage [U] 230 VAC 230 VAC
Power [P] 3320 W 2 x 3250 W
Dimensions (W x D x H) 420 x 270 x 360 mm 420 x 550 x 360 mm
Installation
Remove the white protective foil from the stainless steel parts.
Install the element holder on the support.
Use
Attention : Plug the appliance on a separate group of 16 ampere
This is a double deep fryer, you need 2 separate groups.
Turn off the appliance with help of the switch.
Fill the container with oil or hydrogenated oil until the MAX line.
NOTE! The use of solidified fat is not allowed.
Plug the earthed plug into an earthed 230V socket, the green lamp will light now.
Set the thermostat to the desired temperature. The orange lamp will light.
When the set temperature is reached, the orange lamp goes out.
You can now use the deep fryer.
This deep fryer is designed with a unique cold zone, this extends the usable life of the oil
considerably.
Regularly check if there is sufficient oil or hydrogenated oil in the container. The level should never
fall below the MIN line.
When used intensively, the fat must be strained regularly.
You must replace the fat or oil if it starts to foam.
After use
Turn off the appliance with help of the switch.
Put the lid on the deep fryer, so that the fat does not age.