Hendi 203125, User Manual

Page: 5 / 72

5
EN
Grounding installation
This appliance is classified as protection class
I
and must be connected to a protective ground.
Grounding reduces the risk of electric shock by
providing an escape wire for the electric current.
This appliance is fitted with a power cord that has a
grounding wire and grounded plug. The plug must
be plugged into an outlet that is properly installed
and grounded.
Preparation before using for the first time
• Remove all protective packaging and wrapping.
Make sure no packaging debris remain on the
appliance.
• Check for completeness (1 dripping tray includ-
ed) and any transport damage. In case of damag-
es or incomplete delivery, please contact supplier
(See --- > Warranty page).
• Keep the packaging if you intend to store your ap-
pliance in the future.
• Ensure there is enough clearance around the ap-
pliance. Place the appliance in a well-ventilated
area.
• Connect the power plug to a suitable electrical
wall outlet.
• Switch ON the appliance by pressing the power
switch (1) to ON position. Set the temperature
control knob (4) to about 250°C & dry running
without food for about 5 ~ 10 minutes in the first
use. The orange heating indicator (4) will light up.
Note: Due to the manufacturing residues, the
appliance may emit a slight odor in the first few
cycles. This is normal and does not indicate any
defect or hazard. Make sure the appliance is well
ventilated.
• When the temperature is attained, orange heat-
ing indicators (3) goes off.
• Allow the appliance to cool down completely and
clean it afterwards (See ---> Cleaning and main-
tenance).
Main parts of the griddle
1 6 2 3 4 5
1. Power switch (ON/OFF)
2. Dripping tray
3. Heating indicator (orange)
4. Temperature control knob
5. Griddle plate
6. Ventilation holes