Henderson SHUTTER SLIDE, System Manual, Page: 5 / 8

STEP 6:
Check and adjust the shutter height so that it is between 20 - 32mm from bottom of track.
STEP 5:
Hang the shutter onto the track, set the height and tighten into position.
STEP 7:
Ensure shutter is parallel to the wall and track.
i. Set shutter height by rotating strap bolt
on flats
ii. Once the required position is set –
tighten the thin nut against the apron
plate.
i.
ii.
20mm –
32mm
Page 5